Better Touch Better Business
About the sanding machine sand removal method is introduced
by:Gewinn
2020-06-18
When we were in different sanding machine operation, hard to avoid can let alien sanding machine appeared some damage, such as sand marks, basically every alien sanding machine appeared sand mark, today let different sand GuangJiChang tutoring how we remove sand marks.
1, alien sanding machine before use with feeler adjust each sand cut the amount of light.
2, open the different sanding machine, check the abrasive belt, if there is any damage or cause artifacts appear sand mark area.
Replace the new abrasive belt.
An abrasive belt use for 2 hours, that is suihua alien sanding machine, should be replaced in a timely manner.
Alien or replace abrasive belt sanding machine adjustable machine and sand after mark, need to adjust the sanding again and again.
4, such as using coarse sand belt or explosive belt, stop recycling dust around 4 hours.
5, desanding machine to ensure normal use, in addition to the sand at the bottom of the machine does not have dust, can't disorderly adjustment desanding machine into the wind gate, internal pressure change in addition to the sand machine, scale deformed sanding machine prices, thus reducing desand effect.
6, adjust the pressure grinding apparatus, shall not force fierce pressure, man-made board different sanding machine, must be lighter, lest 180 sand with sand force is big, easy off grain, sand marks.
Above is alien sanding machine can effectively remove the introduction of the method of mark of sand, and hope that we can adopt or understand.
Custom message