Operating different polishing machine should pay attention to what matters

Polishing machine, also known as grinding machine, is often used as a mechanical grinding, polishing and waxing. Polishing machine operation is the key to try to get the maximum polishing rate, in order to remove polishing when the damage layer as soon as possible. At the same time also want to make polishing damaged layer does not affect the final observation to the organization, namely not cause false organization. The former requires the use of relatively coarse grinding, polishing rate to the larger in order to make sure there are damage layer to remove the grinding, polishing damaged layer is deeper; The latter requires the use of the finest materials, polishing damaged layer is shallow, but the polishing rate is low. Operation note: special polishing machine operator's hand, foot to stay away from rotating polishing head. The operator may not be on the power cord or the power cord into the polishing head. The operator must be safe. Polishing area shall not exceed the length of the power cord. The operator shall not without authorization to sell the operation handle. When stop, it is necessary to completely stop rotating at high speed polisher, can loosen the handle. You can't use polishing pad polishing with dust and dirt. Fouling too much polishing pad to clean, with the change in time. Change, installing a polishing pad, must cut off power supply.