Indonesia
Deutsch
Better Touch Better Business
Second-hand woodworking machinery claim to the work place have?
by：Gewinn
2020-09-27
Second-hand woodworking machinery to the requirement of work place is:
a, all the use of toxic, stimulating and combustible qualitative process should be placed in separate workshop, or arrange special lies between locations in the plant, and equipped with personal protective equipment and fire equipment.
2, logs, sawn timber, waste of channel in the workshop should be set up and eliminate the cross ventilation facilities such as corridor, hall, door curtain, curtain, etc, and prevent the spread of fire facilities such as automatic fire doors, fire smoke damper, water curtain, etc.
3, equipment in the workshop need to arrive safely at the top of the work, should be installed with protective railings and stair bridge. Workshop ground and overpass channels should be laying antiskid ground;
4, commonly used on the pedestrian should not have equipment and line. Its width is not less than 1 m;
5, the ground under the conveyor belt to use flat or she lattice protective plate to cover. The surface of metal plate should be slippery. Grid protective gap width less than 30 mm;
7, sawdust and waste storage tank should be placed outside the factory.
we second-hand woodworking machinery commitment with high quality products, perfect service, welcome friends from all walks of life come to dongguan, the forest industry machinery to visit, guidance and business negotiation.
a, all the use of toxic, stimulating and combustible qualitative process should be placed in separate workshop, or arrange special lies between locations in the plant, and equipped with personal protective equipment and fire equipment.
2, logs, sawn timber, waste of channel in the workshop should be set up and eliminate the cross ventilation facilities such as corridor, hall, door curtain, curtain, etc, and prevent the spread of fire facilities such as automatic fire doors, fire smoke damper, water curtain, etc.
3, equipment in the workshop need to arrive safely at the top of the work, should be installed with protective railings and stair bridge. Workshop ground and overpass channels should be laying antiskid ground;
4, commonly used on the pedestrian should not have equipment and line. Its width is not less than 1 m;
5, the ground under the conveyor belt to use flat or she lattice protective plate to cover. The surface of metal plate should be slippery. Grid protective gap width less than 30 mm;
7, sawdust and waste storage tank should be placed outside the factory.
we second-hand woodworking machinery commitment with high quality products, perfect service, welcome friends from all walks of life come to dongguan, the forest industry machinery to visit, guidance and business negotiation.
Custom message
