Second-hand woodworking machinery mold installation what security measures

by:Gewinn     2020-09-26
Second-hand woodworking machinery mold installation what security measures are

about progressive society we already know a lot of things can be very good use, from the ancient wooden, wood was born, although there is no such equipment can help in the past, but today have the second-hand woodworking machinery becomes different, because we could get the mechanical and simple writing.

the woodworking machinery, we can have what you want, it can be said that the emergence of woodworking has brought a lot of good and second-hand woodworking machinery recycling is because there are many need to second-hand machinery, so that we can meet your requirements, at the same time solve the problem of price, therefore, it is worth to have.

recycling because need a lot of woodworking machinery, the machinery through professional and technical personnel to improve can continue to operate, and can meet our requirements, let's go to good use. I believe that today's need woodworking machinery must have a lot, and the price cannot achieve satisfactory friend, secondary market will be a good choice.

mould installation security measures
mould installation is an extremely important work. Mould installation personnel need to have operation pipe bender and adjust bend mould professional knowledge, the quality of pipe bending is quite important.

the size of the mould must be suitable for the machine, if the curve is larger than the original value of pipe fittings, machine caused by the excessive load, cause the failure of the mechanical properties, but they may have harm to the personnel in the operation.

mould installation personnel must cultivate the idea of personal safety consciousness, the installation of the mould must be carried out with the manner of the security. All the mould installation personnel should be aware of their own in execution work, security and provide a safe operating environment for the importance of others.

1。 Please do not in the case of start the oil pump motor, place the hands, fingers, or any part of the body in the mold working area.

2。 Do not use in has not read or understand mould installation manual, and the results show that, for the mould installation, adjustment or movement.

3。 When working on or near the machine, please do not wear a tie, jewelry or loose clothing.

4。 If the mold is too heavy to be lifted up by your hand, then you should use the appropriate mechanical assembly method. Should install a rings in the mold, the use of rings to maintain the stability of mould parts in hanging on the way.

5。 Mold should be wiped clean before installation and removal of dust, metal cutting, or other foreign dirt, etc. Otherwise will cause the matching is not consistent with phenomenon, will cause many injuries or machine, mold damage.

6。 For different operation, the need to change the pipe bender control setting, please make sure the selector switch Settings are correct. And the execution of bend before work, please test to determine the correct operation.

7。 The area around the bend of lubricating oil will make gliding, and dirty mould area careful processing mould, second-hand woodworking machinery in the bent pipe will be coated with the pipe end of the absorbent coatings, inserted into the mold and the range of actual use, in order to prevent the bent pipe lubricating oil drip on the machine.

8。 When the pipe bender can't run or unattended operation, even a short time, before the reboot the machine, please check all the switch Settings.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...