Indonesia
Deutsch
Better Touch Better Business
Secondhand double plane maintenance method
by：Gewinn
2020-09-24
Used double-sided maintenance method of plane
1, the new transmission of gear oil should be replaced in the normal use after a month, oil amount added to the oil near the mirror. Every time after oil change in the machine work about two thousand hours. In 90 the amount of oil or other common gear oil.
2, feed universal joint play once a month butter lubrication. Drag plate, the slider bar knife shaft lifting activities such as site once every week to add oil, lubrication and rust.
3, a day before coming off work should be cleaning under the bed and lathe bed sawdust, flat belt, variable speed belt should clean up more, anti-slip burned to death. Some super wide, variant material handling first used double-sided planer into the processing.
4, conditional manufacturers will produce round plate and the product can be divided into two machines do, lest affect accuracy. In addition, the production of all plate, trimming knife most like the back of the small gate above 0. 1 mm, so can reduce little wear and tear by the gate.
5, adjustment or shift should be to adjust the level of machine.
6, used the pressure of the double sided planer shoulds not be too big or too small, the cylinder should be lower, as far as possible to increase the range.
1, the new transmission of gear oil should be replaced in the normal use after a month, oil amount added to the oil near the mirror. Every time after oil change in the machine work about two thousand hours. In 90 the amount of oil or other common gear oil.
2, feed universal joint play once a month butter lubrication. Drag plate, the slider bar knife shaft lifting activities such as site once every week to add oil, lubrication and rust.
3, a day before coming off work should be cleaning under the bed and lathe bed sawdust, flat belt, variable speed belt should clean up more, anti-slip burned to death. Some super wide, variant material handling first used double-sided planer into the processing.
4, conditional manufacturers will produce round plate and the product can be divided into two machines do, lest affect accuracy. In addition, the production of all plate, trimming knife most like the back of the small gate above 0. 1 mm, so can reduce little wear and tear by the gate.
5, adjustment or shift should be to adjust the level of machine.
6, used the pressure of the double sided planer shoulds not be too big or too small, the cylinder should be lower, as far as possible to increase the range.
Custom message
