Better Touch Better Business
Understand the operation method of second-hand woodworking machinery
by:Gewinn
2020-09-26
Understand the operation of second-hand woodworking machinery method
what second-hand woodworking machinery including:
1. Log processing machinery to log on at the beginning of a way of processing machinery, such as saw cutting, wood veneer, desiccant, etc.
2. Board manufacturing and processing machinery solid wood and man-made board ( Material such as plywood, MDF, particle board) Manufacturing machinery, and to deal with the surface of the plate, used for furniture processing sheet before the way with the mechanical process, such as machine, refers to pick up, hot and cold pressing machine, wrapping machine, etc.
3. Furniture manufacturing machinery including board type furniture, office furniture, solid wood furniture and other wood products processing and manufacturing to machine, manual, semiautomatic and fully automatic. Many varieties, wide range. From cutting, shaping, profiling, drilling, tenon chamfer, splicing combination, glue, paint on packing and so on various aspects, all can be done by mechanical
woodworking machinery operation method:
1) Woodworking machinery operators must be familiar with all kinds of mechanical structure, performance and operation and maintenance method, to use, people accountable for results.
2) When operating woodworking machinery, should wear overalls, tighten cuffs, female comrade must wear good working cap, braided into the cap; Don't wear gloves, scarves, etc.
3) Machinery must try it out before you start work, parts working properly rear can begin to work.
4) Woodworking machinery on the shaft, the chain, pulley, the belt and other moving parts, should be set shield and shield.
5) Mechanical if any abnormal situation during operation or other failure occurs, should be immediately cut off the power supply, parking overhaul.
6) Replace the planer knives, saw blades, must cut off the total power supply.
what second-hand woodworking machinery including:
1. Log processing machinery to log on at the beginning of a way of processing machinery, such as saw cutting, wood veneer, desiccant, etc.
2. Board manufacturing and processing machinery solid wood and man-made board ( Material such as plywood, MDF, particle board) Manufacturing machinery, and to deal with the surface of the plate, used for furniture processing sheet before the way with the mechanical process, such as machine, refers to pick up, hot and cold pressing machine, wrapping machine, etc.
3. Furniture manufacturing machinery including board type furniture, office furniture, solid wood furniture and other wood products processing and manufacturing to machine, manual, semiautomatic and fully automatic. Many varieties, wide range. From cutting, shaping, profiling, drilling, tenon chamfer, splicing combination, glue, paint on packing and so on various aspects, all can be done by mechanical
woodworking machinery operation method:
1) Woodworking machinery operators must be familiar with all kinds of mechanical structure, performance and operation and maintenance method, to use, people accountable for results.
2) When operating woodworking machinery, should wear overalls, tighten cuffs, female comrade must wear good working cap, braided into the cap; Don't wear gloves, scarves, etc.
3) Machinery must try it out before you start work, parts working properly rear can begin to work.
4) Woodworking machinery on the shaft, the chain, pulley, the belt and other moving parts, should be set shield and shield.
5) Mechanical if any abnormal situation during operation or other failure occurs, should be immediately cut off the power supply, parking overhaul.
6) Replace the planer knives, saw blades, must cut off the total power supply.
Custom message