What are the characteristics of numerical control woodworking lathe in operation

Numerical control woodworking lathe coordinate system is the inherent coordinate system, is to make and adjust the warp and woof of numerical control woodworking lathe and the warp and woof of still is to set up the workpiece coordinate system. Numerical control woodworking lathe coordinate system has been adjusted in the factory, usually don't allow to change. Reference point is the fixed point of multipurpose woodworking machines, its position by mechanical switch blocks or constraints. To return to zero machine recognition machine tool coordinate system. Back to zero machine it is necessary to first launch before CNC woodworking lathe numerical control lathe, a necessary first to understand the process. In the form of a panel and CNC system are closely related. Numerical control woodworking lathe is not too short. And usually lathe control system. Most of the circuit is relatively short, usually after open the power supply, numerical control system can directly start. When switched on, after back to zero, so, back to the origin (CNC woodworking lathe Or the source and the reference point of multipurpose woodworking machines have a fixed point distance) 。 CNC multipurpose woodworking machine tool back to zero ( Reference point) Process: switch to the & quot; Zero & quot; The azimuth. According to the manual feed axis direction key + X, Z + light return to zero. You need to go back to zero ( Reference point) , after the launch, if not the assignment, pitch error counter counter function is not complete, gap. Set up mechanical mechanical origin G54 directly related programming instructions.