Wood plastic sanding machine maintenance instructions

In order to be able to make wood plastic sander prolong life, keep the good performance, today again to popularize the knowledge of cleaning maintenance and protection. 1. Reducer in the first three months in a reducer motor oil, oil change every homework 2000 hours later. For each activity parts should add grease once a month. 2. Wood plastic sanding machine shipped with not too tight. Or you will make delivery of shaft deformation craze, cut transportation with the using life of 3. Machine should avoid direct sunlight or UV putty will dry solid in the coating on the wheel, so that the coating damage of wheel. 4. Such as coating damage faster, please will be bored with child into corrosions weak point, if using NC lacquer, please contact our company use another raw material coated wheel. Wood plastic sanding machine cleaning and maintenance to maintain the performance and efficiency of the machine, and regular cleaning and maintenance is not or lack of homework. Note: prior to the maintenance or repair work, must be closed the main power supply. Cleaning: a fixed period of cleaning: daily cleaning wood-plastics sanding machine dust collecting tube and dust collecting cover. Use a hard brush and rags. Using the lens cleaner and soft cotton swab. Washing machine inside and near the dust accumulation. Each week cleaning lifting screw and dust on the chain. Protection and maintenance: security system start the machine, must test all the safety switch is normal or not. Every week check and test of brake system, prevent 'urgent stop' unable to perform. Main motor drive belt appropriate adjustment will increase the belt transmission power and the suitable life, refer to the following to view the moment: see for the first time: 4 hours after new have started to use or replace new second view: from the third view: one day after the previous view from the previous view, three days after a fourth view: from the previous view, five days after the fifth view: distance after 7 days after the previous view, view: every other week notice: wood plastic pulley of the sanding machine if the same in the meantime a craze to replace, must replace hang together in the same other belt on the pulley.