Wood sanding machine machine tool according to the following require regular maintenance! !

Wood sanding machine machine tool according to the following require regular maintenance: each class after work: 1. Thoroughly with filtering compressed air to clean the whole machine tools, special attention should be paid to the conveyor belt inside surface should not be dust and mesa, avoid reduce the grinding precision. 2, sanding machine should start cleaning dust removal device. 3. Check the compressed air filter and the condensate removal filter. After working 40 hours per: 1. Check the compressed air oil mist. 2. Check whether the sanding machine screw is loose, loosen the fastening immediately after, otherwise cause machine damage. After 200 hours per work: 1. Grease lubrication hoisting chain and check its tension. 2. Check belt tension and the degree of wear and tear. 3. Oil gun to each oil hole injecting grease. 4. Check whether the fastening screw is loose at a high speed. After 300 hours per work: 1. Remove and clean compressed air filters. 2. Check belt tension. 3. Check the machine level of horizontal and vertical degree. 4. Check the flatness of workbench. 5. Check the overpass switch on ceramic tube closely contact with abrasive belt of wear degree, replace if necessary.