Indonesia
Deutsch
boring machinery breaks the bottleneck.
Production backups caused by boring operations have led the carpenters to start looking for machinery manufacturers to help speed up production.
Products
Dongguan woodworking machinery is suitable for the use of the site
by：Gewinn
2020-09-24
Dongguan woodworking machinery suitable for the use of the
dongguan woodworking machinery is an important tool to carry on the processing of wood, in order to make the woodworking machinery have a better working environment, woodworking machinery in the workplace should meet the following requirements:
1, all the use of toxic, stimulating and combustible qualitative process should be placed in separate workshop, or arrange special lies between locations in the plant, and equipped with personal protective equipment and fire equipment.
2, logs, sawn timber, waste of channel in the workshop should be set up and eliminate the cross ventilation facilities such as corridor, hall, door curtain, curtain, etc, and prevent the spread of fire facilities such as automatic fire doors, fire smoke damper, water curtain, etc.
3, equipment in the workshop need to arrive safely at the top of the work, should be installed with protective railings and stair bridge. Workshop ground and bridge channels should be laying prevent slippery ground.
4, commonly used on the pedestrian should not have equipment and line, the width is not less than 1.
5, the ground under the conveyor belt to use flat or she lattice protective plate to cover. The surface of metal plate should be prevented slippery, grid protective gap width is not more than 30 mm.
6, sawdust and waste storage tank should be placed outside the factory.
dongguan woodworking machinery is an important tool to carry on the processing of wood, in order to make the woodworking machinery have a better working environment, woodworking machinery in the workplace should meet the following requirements:
1, all the use of toxic, stimulating and combustible qualitative process should be placed in separate workshop, or arrange special lies between locations in the plant, and equipped with personal protective equipment and fire equipment.
2, logs, sawn timber, waste of channel in the workshop should be set up and eliminate the cross ventilation facilities such as corridor, hall, door curtain, curtain, etc, and prevent the spread of fire facilities such as automatic fire doors, fire smoke damper, water curtain, etc.
3, equipment in the workshop need to arrive safely at the top of the work, should be installed with protective railings and stair bridge. Workshop ground and bridge channels should be laying prevent slippery ground.
4, commonly used on the pedestrian should not have equipment and line, the width is not less than 1.
5, the ground under the conveyor belt to use flat or she lattice protective plate to cover. The surface of metal plate should be prevented slippery, grid protective gap width is not more than 30 mm.
6, sawdust and waste storage tank should be placed outside the factory.
Custom message
Related Products
