Indonesia
Deutsch
boring machinery breaks the bottleneck.
Production backups caused by boring operations have led the carpenters to start looking for machinery manufacturers to help speed up production.
Products
Dongguan woodworking machinery need work environment
by：Gewinn
2020-09-24
Dongguan woodworking machinery need work environment
dongguan characteristic of woodworking machinery:
(1) high speed cutting.
2. Some of the parts manufacturing precision is relatively low.
3. Woodworking machinery of high noise level.
4. Woodworking machinery generally don't need a cooling device, and need chip removal dust removal device.
5. Woodworking machinery cannot be well versed in automatic feed way, numerical control station processing way.
dongguan woodworking machinery working environment:
( 1) All that the use of toxic, stimulating and combustible qualitative process should be placed in separate workshop, or arrange special lies between locations in the plant, and equipped with personal protective equipment and fire equipment.
（ 2) Logs, sawn timber, waste of channel in the workshop should be set up and eliminate the cross ventilation facilities such as corridor, hall, door curtain, curtain, etc, and prevent the spread of fire facilities such as automatic fire doors, fire smoke damper, water curtain, etc.
（ 3) Need to arrive safely in workshop equipment at the top of the work, should be installed with protective railings and stair bridge. Workshop ground and bridge channels should be laying prevent slippery ground.
（ 4) Commonly used on the pedestrian should not have equipment and line. Its width is not less than 1 m.
（ 5) The ground under the conveyor belt to use flat or she lattice protective plate to cover. The surface of metal plate should be slippery. Grid protective gap width is not more than 30 mm.
（ 6) Woodworking machinery work when the sawdust and waste storage tank should be placed outside the factory.
dongguan characteristic of woodworking machinery:
(1) high speed cutting.
2. Some of the parts manufacturing precision is relatively low.
3. Woodworking machinery of high noise level.
4. Woodworking machinery generally don't need a cooling device, and need chip removal dust removal device.
5. Woodworking machinery cannot be well versed in automatic feed way, numerical control station processing way.
dongguan woodworking machinery working environment:
( 1) All that the use of toxic, stimulating and combustible qualitative process should be placed in separate workshop, or arrange special lies between locations in the plant, and equipped with personal protective equipment and fire equipment.
（ 2) Logs, sawn timber, waste of channel in the workshop should be set up and eliminate the cross ventilation facilities such as corridor, hall, door curtain, curtain, etc, and prevent the spread of fire facilities such as automatic fire doors, fire smoke damper, water curtain, etc.
（ 3) Need to arrive safely in workshop equipment at the top of the work, should be installed with protective railings and stair bridge. Workshop ground and bridge channels should be laying prevent slippery ground.
（ 4) Commonly used on the pedestrian should not have equipment and line. Its width is not less than 1 m.
（ 5) The ground under the conveyor belt to use flat or she lattice protective plate to cover. The surface of metal plate should be slippery. Grid protective gap width is not more than 30 mm.
（ 6) Woodworking machinery work when the sawdust and waste storage tank should be placed outside the factory.
Custom message
Related Products
