Heavy sanding machine safety operation procedures

Before starting the heavy sanding machine safety operation procedures: : 1, to ensure effective grounding machine tool. 2, check equipment before using equipment power supply is normal. 3, do equipment lubrication and maintenance in time, ensure the normal operation of equipment can. Start: 1, please will watch, before starting the article such as bracelets, fasten cuffs, beam good hair, don't wear slippers operating machine tools in order to avoid carry-on baggage cause serious damage. 2, pull (handle), open the valve, tensioning abrasive belt, connected to the power supply. 3, according to the height of plate thickness adjustment bench work, turn the handwheel to press a conveyor bed elevator button platform, pay attention to the thickness of the display of the readings. 4, according to the size of the sanding quantity rotary conveying bed lift hand wheel or press the elevator button rises workbench, pay attention to the thickness of the indicator reading. 5, the sheets into sanding, respectively from the ammeter reading before and after the size of the abrasive belt motor working current. 6, don't be too small or too large workpieces, the workpiece feeding speed and good processing capacity should be determined according to the specific situation, don't be speeding up, not in the case of excessive/boot. 7, do not use abrasive belt with scratches, before installation of abrasive belt, and make sure the workpiece surface is smooth, no dirt and indentation, and confirm the abrasive belt running direction and abrasive belt on the back of the logo in the same direction, after the installation of abrasive belt, pay attention to check the sanding device, ensure that lock solid. 8, check the safety protection device is installed, then close all doors. 9, before any cleaning and maintenance work, be sure to stop the power, and use a dedicated staff around the warning notices. 10, washing machine, often keep the machine clean on the surface of the internal backlog and surrounding ground clean, to ensure the machining accuracy and extend the service life of machine tool. Attention and maintenance: 1, the machine to the specialist operations, prohibit others to violate compasses operation. 2, do equipment lubrication and maintenance in time, regularly check the oil level, keep the oil level in oil line position.