How can the edge banding machine of solid wood processing equipment improve the shortcomings of 'fear of cold?

The edge banding machine of solid wood processing equipment will have the disadvantage of 'being afraid of cold' in use. When the edge banding machine works, it is necessary to select some edge banding strips with good softness and edge sealing surface for mesh processing and Hot Melt Adhesive with good condensation delay. The above methods are adopted, if it is still unable to maintain stable edge sealing and ensure product quality. Then only from the mechanical design to improve the use of edge banding machine performance, improve its 'cold' characteristics. 1. Heat and heat. The equipment above the edge banding machine is transported to the external heater, so that the edge banding is preheated and heated when passing through the belt feeding tissue, increasing the softness of the edge banding and reducing the thickness of the edge banding (3mm) The stress and tension ensure that the edge banding is glued under the condition of preheating and softening, so that the bonding between the furniture edge banding and the substrate is stronger. 2, baking pad heating. The heating plate or heating pipe of the equipment under the belt feeding tray can make the edge banding strip be preheated on the belt feeding tray. After the heated edge banding strip is coated with Hot Melt Adhesive, the cooling and condensing speed of the Hot Melt Adhesive is delayed. It is beneficial to chemical reaction and mechanical embedding in condensation process. 3, wood heating. Add heating equipment to the part where the wood edge is sealed through the magnetic positioning guide rail (Can be equipment heating pipe) The Magnetic positioning guide rail is preheated together when moving forward, so that when the edge banding coated with Hot Melt Adhesive is bonded with wood, the Hot Melt Adhesive and wood can fully blend and then stick to the board. 4, double-sided glue. To improve the gluing organization of the edge banding machine, the method of gluing the plate and the Edge Banding Together is selected. After citing the patent technology of the national utility model, the plate and the Edge banding are heated together and glued together to ensure the plate, the two coated surfaces of the edge banding strip are soaked, bonded and locked with each other. The strength after pvc edge sealing is doubled compared with the original strength of single-sided glue sealing, which completely makes up for the weakness of edge sealing machine due to cold weather. The edge banding machine is suitable for different climates, different edge banding strips and different hot melt adhesives.