Numerical control woodworking lathe common fault
Numerical control woodworking lathe is the most widely application of wood processing industry of equipment, for wood enterprises, the use of numerical control woodworking lathe, the working efficiency and precision of the work had the very big enhancement. As a result, a lot of promising woodworking enterprises, have begun to gradually used to replace the normal woodworking lathe numerical control woodworking lathe. Numerical control woodworking lathe compared with ordinary wood lathe, colleagues in improving production efficiency, also reduced the labor intensity of operators, as long as the good design, the operation of the equipment automatically, less artificial control factors, has greatly improved in accuracy of workpiece. By numerical control woodworking lathe is not direct operation, so the numerical control woodworking lathe at runtime, if fail, people cannot directly manipulate, device will stop running, therefore, CNC woodworking lathe often appear some fault, lathe operator, should understand somewhat. 1, can normal boot, but the motor cannot work. Reason: the power lack of phase, the fuse is burnt, thermal relay tripping. Solution: check the power supply wiring, replacing the fuse, reset the thermal relay 2, a sudden stop work a direction and accompanied by a step motor vibration. Reason: stepper motor direction have sundry lead to blocked. The solution: removing debris, restart the power supply. 3, working tool when stopped at a motionless, step motor and no vibration. Reason: step motor control line break or in a suspended state. The solution: pick up line or restore the state of automatic numerical control woodworking lathe, in operation, common fault, we in the later time, continue to analyze.