Products

Numerical control woodworking lathe maintenance methods

by：Gewinn 2020-04-20

Numerical control woodworking lathe is now the most commonly used in wood processing factories and enterprises of machine tools, because the numerical control woodworking lathe performance is good, basically can do 'people stop constantly, three shifts a day', but for such a big working strength, hard to avoid can appear more or less some problems and faults. Below small make up to you to sort out the CNC woodworking lathe small maintenance method. 1, first of all, we want to electric dust removal in the oven, closed box can better guarantee the internal electric parts is not affected by dust, but after long time use allows the user to out of the dust, dust removal method is: using 0. 6 - 0. 8 mpa spray dry compressed air blowing comprehensive internal panel surface and internal control panel to no dust accumulation. 2, secondly, we want to step motor and motor spindle should be regular and smooth, its outer surface should also be dust removal at any time to maintain its good heat dissipation performance. 3, we have to control panel and buttons available dry cotton cloth, Can dip in with a little alcohol) Gently wipe the dust. 4, in the end, we are going to external connections should be regularly check, see any breakage phenomenon, if there is any breakage should be replaced immediately. The above is the whole of the numerical control woodworking lathe small maintenance method content, hope I can give you help.

Custom message