Numerical control woodworking lathe processing conditions to meet

by:Gewinn     2020-04-24
Numerical control woodworking lathe in the wood processing industry a wide range of applications, mainly it application of numerical control and mechanical aspects of function, in the process of using more intelligent, largely improves the precision of the carpentry in the processing industry. Is a historic progress in wood processing industry, so the numerical control woodworking lathe in machining process to satisfy the conditions? In the process of using notice these conditions? Then we will be in the process of the detailed analysis. Dimensioning shall comply with the characteristics of nc machining in CNC programming, all the size and position of point, line and plane is programming the origin as a benchmark. So best directly coordinates are given in detail drawing size, or as far as possible to the same benchmark note size. The condition of geometric elements shall be complete and accurate, and in the programming, the programmer must fully grasping the geometric elements of composition parts contour parameters and the relationship between geometric elements. Because at the time of automatic programming to outline all of the metal parts geometry elements are defined, the manual programming to calculate the coordinates of each node, no matter what is not clear or uncertain, programming can be performed. But due to component design personnel in the design process to be thoughtless or ignored, often appear parameter is not complete or not clear, such as arc and straight line, arc and arc tangent intersection or phase is near. So when the review and analysis of drawings, must carefully, found the problem timely contact with designers. Locating datum and reliable, in nc machining, the machining operations tend to be concentrated, with the same reference positioning is very important. So often you need to set up some auxiliary datum, or add some process convex platform on the blank. Unified geometric type or size, the shape of the parts, lumen, had better use unified geometric type or size, so that we can decrease The Times of change knife will also control application program or special program to shorten the length of the program. The shape of the parts as symmetrical as possible, convenient to use the mirror to the processing function of nc machine tools to programming, to save time. More information, welcome to visit my company's official website. Only conform to the dimensioning should be consistent with the numerical control processing, the conditions of geometric elements shall be complete and accurate, and reliable positioning base of these conditions can meet the operation of the CNC woodworking lathe can better material in our production process to improve the work efficiency, a higher degree of good to make use of our machine.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...