Numerical control woodworking lathe security issues will know

Numerical control woodworking machinery cutter blade is sharp, should pay more attention to the safety in operation, so we should pay attention to when operating? Let's find out! Should first check before your at work, tools are ready to complete and test run for five minutes, confirm everything is all right to operate. Remember must put the workpiece and tool clamping wants firm, tool rod should not be too long ( Except for boring) ; Turn the little rest stop, prevent tool collision chuck, workpiece or cut hand. Workpiece during operation, the operator cannot stand on is the workpiece, the body without lathe, feet tread upon oil pan. High speed cutting, the use of chip breaker and protective screen. Remove iron, the application of the brush or special hook. Use file polishing workpiece, must hand in the former, left behind; With emery cloth, polishing workpiece to use tools, such as the 'hands clip' stranded in case of injury. In all labor, quantity and cutters should be put in a nearby safe place, do it in order. Numerical control woodworking lathe has not stopped, banned in front on the workpiece or measuring artifacts. The lathe work, prohibit open or unload protection device. Close from work, should be clean and wipe the lathe, and retreated to the tailstock and slip board box bed the right end. Above is the numerical control woodworking lathe must want to know, safe operation to keep in mind in my heart, more than is provided by numerical control woodworking machinery company!