Numerical control woodworking machinery handling and installation considerations
With the development of science and technology, now has been widely used in wood processing factory CNC woodworking machinery. The use of numerical control woodworking machinery to improve the production efficiency and quality of enterprise, creating the good economic benefit. So when we purchase to the numerical control woodworking machinery, should how to transport and install? The detail is below. 1 please read it carefully before operation, the use of numerical control woodworking machinery specifications. 2, after unpacking, due to go a long way, you must first check the X/Y/Z three-axis transport fixtures are in good condition. Must check before machine run by X/Y/Z three-axis fastening screws and transportation fixed frame are all removed. 3, electrical installation, the machine must be without electricity. 4, power grid voltage in excess of the prescribed voltage of plus or minus 10%, should not start the machine. 5, the machine must be grounded, install regulator. Above is the handling and numerical control woodworking machinery installation considerations, hope to be of service.