Numerical control woodworking machinery in the process of using common faults
'Gold without gather nobody's perfect', this is since the ancient times of an old adage, metaphor can't ask a person without a defect error. Of course we numerical control woodworking machinery, too, could not have no faults. Here small make up will introduce you to the shortcomings in numerical control woodworking machinery in use. 1. Noise: woodworking machinery rotational speed is high, fast, hard and soft wood, and combined with the wood spread fast, so the processing production of large noise, operators working in this environment for a long time, the intensity of labor is big, easy to produce fatigue, feel be agitated, the influence is healthy and easy to make the operator error, inductrial injury accident. 2. Dust: woodworking machinery in operation, the sawdust high-speed float in the sky, a tiny dust in a large number of suspended in the air, can easily be inhaled, go down for a long time will bring bad influence to people's health. 3. Vibration: when in manual for machine tool feeding, can cause strong local vibration. Paint when wood is uneven, such as manual pushing knot, bending or other defects are more likely to produce vibration, the vibration of the long time will bring bad effect to human body health. The above three points is numerical control woodworking machinery in the common faults in use process, washing can bring you help.