Numerical control woodworking machinery welding method to resolve the problem
With the development of science and technology, numerical control technology is now and got the perfect union of woodworking machinery and its processing and high efficiency, high precision, long service life. But you never know, it is a good equipment is also likely to fail, so small make up below will help you solve the numerical control woodworking machinery welding problems. 1, the causes for the lack of fusion: input work: (too much energy method 1) Welding longer hours. ( 2) Use the power of aircraft. ( 3) Increase the air pressure value 2, CNC woodworking machinery welding excessive cause the energy of the incoming work method: (too much 1) Reduce the welding time. ( 2) Slow down the decline speed of upper die. ( 3) Reduce the pressure value. 3. Uneven weld reason 1: workpiece deformation method 1: ( 1) To examine whether workpiece size differences. ( 2) Examine the operating condition is caused by deformation of work piece. Reason 2: welding head, base, the contact surface of rough workpiece stick. Methods 2:1, power point, highly uniform. 2. Level adjusting screw. 3. Examine the operating conditions are indeed. 4. Examine the shape of workpiece size. Reason 3: the base support unstable method 3: ( 1) If necessary, improve strong point. ( 2) Base to redesign. ( 3) With hard base. Reason 4: workpiece method 4: (error is too big 1) Tighten the tolerance of workpiece. ( 2) To modify the size. ( 3) Examine the operating conditions. Above is the numerical control woodworking machinery welding problem solution, hope to be of service.