Numerical control woodworking machinery welding problems

In this era of science and technology developed, common woodworking machinery has already and numerical control technology, is widely used in all walks of life, for the enterprise production improved a lot. But numerical control woodworking machinery in use process is hard to avoid can appear some problems, so small make up today is to introduce the numerical control woodworking machinery welding problem how to solve. 1, the causes for the lack of fusion: input work: (too much energy method 1) Welding longer hours. ( 2) Use the power of aircraft. ( 3) Increase the air pressure value 2, CNC woodworking machinery welding excessive cause the energy of the incoming work method: (too much 1) Reduce the welding time. ( 2) Slow down the decline speed of upper die. ( 3) Reduce the pressure value. 3. Uneven weld reason 1: workpiece deformation method 1: ( 1) To examine whether workpiece size differences. ( 2) Examine the operating condition is caused by deformation of work piece. Reason 2: welding head, base, the contact surface of rough workpiece stick. Methods 2:1, power point, highly uniform. 2. Level adjusting screw. 3. Examine the operating conditions are indeed. 4. Examine the shape of workpiece size. Reason 3: the base support unstable method 3: ( 1) If necessary, improve strong point. ( 2) Base to redesign. ( 3) With hard base. Reason 4: workpiece method 4: (error is too big 1) Tighten the tolerance of workpiece. ( 2) To modify the size. ( 3) Examine the operating conditions. Above is the solution of numerical control woodworking machinery in welding phenomenon, hope to be of service.