panel sizing equipment.

Platform saw odando, partition.
Stiles Machinery Co. , Ltd.
The 3800 Series table saw provides 12-ft, 5-in.
Cutting length of sliding table;
The company says the slide supports the full weight of the heaviest material. .
Chip preselection-
Free cutting is a feature of astandard.
This saw is tilting the rod (ALT F-and 453800)a non-tilt arbor (ALT F-90 3800).
Circle 821 SCMI has launched the S13800, with its latest slide saw scoring on IWF.
According to the company, consistent accuracy and durability are guaranteed throughout the 3800mm trip.
The power lift and tilt of the saw blade group meet the standard and have an electronic reading of the it position.
The 822-lap Lazzari USA Juno 3000 I slide saw features a reclining shaft and an aluminum carriage.
Scoring unit by 1-hpmotor.
The electronic blade tilt angle reading speeds up the positioning from cutting to cutting, while the blade tilt regulator with the score Blade and blade height adjustment is on the right-
On the hand side of the machine, the operator can easily reach.
Circle 823 unique machines and tools
Provides overhead panel saws designed for a wide range of applications.
The cut length is available from 48 in. to144 in. , with hold-
Downs and custom tables that meet the specific needs of customers.
The saw car is loaded with balls-
Bearing bushing traveling on hardened steel shaft, stable quality.
The 824-turn digital cutting system DIGIRIP system can be used as a replacement for computerized beam saw. DIGI-
RIP automate the rip and cross fence of the sliding board saw by using the \"touch screen\" monitor.
Size can be set at 1/32-in. increments.
The quality control test has proved DIGI-
Measurements in the ripsistently set-
The company says the number is only a few parts per thousand.
825 circle Holz-
Her super slide 1245 slide saw features: adjustable table top height, convenient control and tools for location, single
Lever scoreboard adjustment, easy-to-
Read the digital display.
Circle826 Wadkin USA has up to 51 in panel saw handle panel for the swiko slide panel. by 98 in.
And solid materials up to 4. thick.
Features include: unique scoring saw mechanism with automatic height adjustment, 10-in.
Diameter blade, 4 1/8-in.
Diameter scoring blade and heavyduty motor.
827 lap MR-
It is reported that 21 group expert groups from multicore cut the labor force with a single knife
By tearing the entire panel into a narrow strip, saw and slotted at the same time.
Options include: Saw arb on top or top and bottom, jam-
Nut bar/gasket system for closing blade spacing, jumping
Knife bars for non-continuous slotting and combined saw/groover cutting heads.
828 lap Pistorius machine
The panel saw has a repetitive stop device that reduces adjustments for horizontal cutting of the same strip of width and programming tracks to set a fixed size for continuous work.
In order to avoid the outbreak, the number of revolutions is about 5 times.
Circular 829 horizontal panel saw Griggio SC 1400 panel saw with scoring blade from Atlantic Machinery
, With aluminum sliding table, 6. 6-
Hp main motor with overload protection and Magnetic starter, 3/4-in.
Scoring motor, aluminum slide with 63-in.
Travel and fully adjustable crossover
There is a cutting fence for two flip stations.
Other features include 33-in. by 211/4-in. table, 12-in.
Blade Capacity and tilt lever to 45 [degrees].
Circle830 Anthon series LNA/LNB/LNC panel saw supplied by Eurohansa Inc.
Features: cutting length 3 to 25 feet;
The cutting height ranges from 4in. to 12 in.
Depending on the type of machine and circuit board; and [+ or -]0. 006 in.
Positioning and cutting accuracy.
The company says all the machine frames are made of steel parts that have no vibration and anti-torsion parts.
831 circle Sherin America
Say its Fl panel saw offers 3-in.
Book the height at an affordable price.
It is equipped with a computer-controlled conductor.
Automatic length and automatic saw blade projection are standard.
The company says the new screen controls make it easier for the machine to operate.
It is easy to input cutting data manually.
Advanced drives also lead to fast cycle times, the company said.
Richard T. offers 832 lapsByrnes Co.
The new Scheer postformed saw model PA5053 has four feeding mechanisms
Manual feed before and after, front load roller, rear load with load system, and rear load through the scissor lift.
AreCNC-all these options
Controlled by PC to enable it operators-
Friendly and unlimited memory.
One report is provided for all saws as runvibration-
Free on the hardening guide.
Quattro offers 833 laps-
High tech, MacMazza MCS-
Page 4500-
Working panel saw with heavy mechanical base with bracket
Lower pressure beam plus auxiliary holding device-downcylinders.
Saw rack runs on two precise machining rails by means of wear-
Proof \"turcite\" pad.
Ananti is covered on the table
Scratch the phenol material to receive-
Type push clip.
The device is equipped with an air floating platform and an automation platform.
Circle 834 Holzma new model HPP 81 panel saw-U. S. , Div.
StilesMachinery\'s company.
Features: high
High speed program fence with clip, high
Speed saw car and heavy construction, built in-
Incut/groove sequence system, stress relief cutting system and 18-for Rabbet and dado carpentry-hp motor.
Circle 835 Force Machinery, a dealer at Mayer panel saws, provides a controller that connects almost any PC with ASCII format to panel saw.
The direct link from PC to the Mayer program is to select the cut list and download it into the saw. On-
The board storage in the PC2000 is suitable for 1,000 cutting steps, that is, 70 to 80 normal cutting pictures, the company said.
Circle 836 HendrickSaw says its CTCS countertop cutting station panel saw is a very valuable tool for any rear countertop manufacturer.
Saw allows the operator to use up to 6-in.
Put the high backsplash into the desired angle slot for accurate angle cutting at 90 [degrees], 22 1/2 [degrees]and 45 [degrees].
Other features include 71/2-hp motor, 16-in.
The blade and maximum cutting length are 54 in.
Midwest/Panhans model 3270 panel saw works up to 10 feet from Midwest automatic handle, 3 in.
Thick, with oneman operation.
CNC provides graphic display of cutting patterns and provides optimization software to maximize production and download capabilities.
Circle838 vertical panel saw Holz-
Her super-cut 1270 vertical facing panel saw features: a retractable conveyor belt roller on the workpiece support rail for easy integration
Human panel movement;
Automatic saw head movement for vertical and horizontal cutting;
Automatic cut-in and retraction of saw blades at any reset point;
Scoring knife system;
Sound insulation;
And integrated dust collector.
839 circle Colonial saw available all-
New Striebig Standard II, vertical facing panel saw.
Key features include: stronger, heavier frame, more larger bearings for smoother operation, more panel support rollers with closer spacing and new double support rollers
It is reported that the step locking mechanism, OptiScore single blade scoring system has a longer blade life and a 50% strongercenter shelf.
IWF will display the combined panel saw/panel router for round 840 safe speed cutting for the first time.
This machine combines the company\'s standard panel saw with a fast-changing router lift platform that enables users to cut panel sizes and make up to a maximum under the same basic frame. This saves both floor space and the high cost of buying two machines.
841 laps she-
The Saf panel router is from Safranek shopises Inc.
The company says it provides reliability, accuracy and safety.
Additional features include: pneumatic fixture packaging, dust system, vertical index, adjustable bar block and second router installation. The Her-
According to the company, the Saf panel routeralso is also very good for dadoing.
FM-circle 842
200 series tenoners, Sanders, foilers, edgebanders andsoftformers from Fietcher Machinery Co. , Ltd.
Designed for fine copy furniture manufacturers.
The toining section has a top trim bottom jump score and a top and bottom toining ability.
Circle 843 Danckaert offers Celaschi Progress, which says it is the only production order
Using the end tension of the two transport chains, the square and accuracy at both ends are generated.
Other features include: flexible unit combinations of cabinets, wood products, furniture, etc. ; andquick-
Set up grinding and sizing devices.
844 circle Casey\'s FWH-100 eight-
The station sash hauncher can install eight different parts at a time.
Two loops produce the top and bottom of a double loophung window.
With hauncher, a cut.
The company says users can make two windows per minute on sawwood and molded parts.
Nova 3 double from Balestrini-solid wood system 845 turn
Endtenoner, which owns a crown gear assembly, says it will never lose zero reference points for faster, more accurate installation.
The system is distributed in the United States. S.
Hopper feeding, 100 pieces can be processed every hour.
An extended internal computer memory can store up to 400 settings.
Derda Inc. offers 846 laps
Friulmac FN-
7 There is a return conveyor belt under the machining center, enabling the workpiece to be returned to the operator after both ends are machined to the desired configuration.
It is fully hydraulic and has variable feed speed.
Up to 51 workpieces can be accommodated.
Length dropped to 4. minimum.
Circle847 by Richard T. Byrnes Co.
, Byrnes/Bacci TSD-D double-
With 11 different positioning measurements, Sidedtenoner can be recalled automatically, thus shortening the installation time and improving the production capacity.
The company said that the accuracy of linear and angular measurement of the workpiece is guaranteed, and the shaft position is measured to Baidu and ten millimeters.
848 ring Torwegge CNC double
Tenoner, the terminal from European woodworking machinery, has the latest computer and electronic technology, the company said.
All machine parameters can be programmed and controlled by the on-board computer.
Operating data can be entered and downloaded via a remote computer or barcode scanner.
Production data management and trouble finding programs are also provided.
849 Millin circle-
Johnson\'s 820 is one. or two-station double-
Endtenoner is reported to be meeting most of the points, trim, Mao, coping, dado, cabling or sanding needs.
It will process the inventory from 6. to 120 in.
Speeds range from 15 to 75 fpm.
It is characterized by 38in.
The chain beam laying area before maintenance-downs and 7-in.
Beyond the throat gap of the feedback chain.
The Circle 850 progressive system represents its double
Ender provides changes in the profile and part size in less than two minutes.
The incremental feed system can be used for online drilling, wiring and drilling of parts and functions, including the adjustable side of the machine and the cutting motor mounted on the hardened profile guide rail with linear bearings for fast,
Quattro offers 851 laps-
Technically, the IDM combination tenoner/bandercomes comes with an unmolded base completely made of steel with normal and ground sliding rails.
It also has cast-
The carriage of iron fixing and moving beams, at each time the beam is moved, can automatically and capillary lubrication of the carriage slides of all moving beams.
The feeding track consists of a steel chain and a liner with a special bullet proof pad
Friction material.
Circle 852 Wadkin USA says its tenoners provide a good track system and various head configurations on the basis of rib castings
Joinfter joints are reported to ensure continuous accuracy.
Circle 853 biesmeyer Mfg. Corp.
Say its blade shield is the one you should use as it will not get in the way of you.
When using a fixture, etc. , it has sufficient clearance for the workpiece with a cover, and the cover can be parked above the table saw.
The alarm system is standard with the option to collect dust and install the floor.
The new S300 slide panel of the Circle 854, Mini Max, launched at IWF, features 3 to 5 scoring features. 5-
Hp motor, 300mm saw blade and 120 slotted blade, driven by two independent motors for 50-in.
Rip processing capacity 4-ft by 8-ft sheet stock.
The company says it provides the accuracy and versatility of larger, more expensive saws without a heavy workload.
The Steton model SC 400/32001 slide saw of dan855 Danckaert features: 10-
10-ft panel capacity
Hp main motor 3/4-
HP scoring motor, external adjustment of scoring blade, 45 [degrees]
Titl and 30mm dado.
Options include electric height and tilt adjustment with electronic reading of angle and fence position.
856 is available from Tekna, Gabbiani throughfeed panel saw with wifriends
Drive roller with free wheel-
Coupling surface rollers.
Operate with belt-
Engage with the orientation Department and the asplit vertical alignment system.
The lateral mounting system allows the panel to be reassembled and the cutting head includes a bladecage driven by a brushless motor with a separate unit.
The vertical panel saw of Adwood has its own
Replace the welded support frame with bolts;
Special floor preparation is not required, the company said. The self-
It is reported that the support frame improves the stability and accuracy of the machine, and the cutting tolerance is within 0. 008-in.
The company added.
The saw has a fully enclosed safety and functional scoring unit and provides a patented dust control system for dustfree sawing.
Circle 858 Tekmatex now distributes Ping An double-end tenoners.
The CNC version has 26 automatic setting axes;
Depending on the size of the inventory and the work to be performed, several models are available.
Homag FLO 859mm double round 22/23
Mortise machine Machinery Co. , Ltd. of vertical frame.
The company says it has a unique design that includes shorter chains and easier feeding.
Other features include: Maximum working width of 102. , 16-
82 fpm feed speed, the panel feed is easier due to the gear running in front of the panel rather than behind, and the electric rotation adjustment.
The company said that the grading/stacking unit does not tear when processing a single board or laminated panel, and the entire unit can tilt the processing of the inclined edge.
INTERBIMALL 860\'s new Gigen North American MK2 angle system features cross and rip putters with clips to accurately perform complex cutting patterns, the company said.
Programs can be downloaded from a personal computer.
MK2 is said to bridge the gap between a single wire saw and an angle system.
Circle 816 Casadei redesigned all of its beam saws, including the addition of a new post-forming device.
Other improvements include automatic adjustment of the saw blade to the thickness of the panel, as well as a quick locking/unlocking mechanism for replacing the blade.
Circle 817 curate Technology is the only company with US manufacturing Technology. S.
Deliver a speech in the interbimall\' 92 exhibitor program.
The company presents the ProScale series of its digital linear measurement systems.
Proscale has an LCD display that can be read in fractions, decimals, or millimeters.
Sliding table saw and tape measure are one of its applications.
818 circle Gabbiani GDG Delta panel saw from Stefani Group america for tear and cross handling of panel stacks up to 115mm thick.
Saw is manual, half
Automatic and automatic with fixture, with or without lifting table.
Round 819 cm, The Selco BiesseAmerica wna cnc programmable panel size Center provides a solution to handle the narrow strip staggeredcutting mode, the company said.
The center has three sites: rip, cross cut, and a waiting station for the accumulation of bars that are temporarily in a parking state.
A computer-controlled shuttle bus connects three stations.
Transmission of computer control.
The transfer moves the bar according to the cutting mode without interfering with the next cut to be made.