Punch manipulator installed up and down, to follow the five principles of stamping design
Installing a stamping manipulator, stamping design should follow five principles as follows: 1, stamping parts, it must be used in the process of design value, and must have a certain technical and production good stamping parts to meet the needs of the assembly and assembly. 2, the design of the stamping parts must follow the principle of reducing energy consumption, improve the utilization rate of material. Try to avoid the waste of materials can be appropriately using cheap materials with the permission of the price. 3, the design of the stamping parts must be reasonable structure, simple shape that is conducive to optimizing mold structure, simplify the engineering application, it also is helpful to improve the efficiency of stamping parts production. 4, the design of the stamping parts must be able to use, and on the premise of can be used to guarantee the precision and surface texture, can't be too rough, so also can reduce the rejection rate. 5, stamping parts of the design to ensure that the existing machinery and equipment to carry on the processing, this will increase the utilization rate of the mould, improve the service life of it. Punch manipulator, punch and manipulator of more relevant content to http://www. gmrcsk。 Com /, we wholeheartedly at your service.