The application of the simple numerical control punch mould and maintenance
by:Gewinn
2020-03-26
Mould should be regular cleaning and oil.
Different thickness under different material should choose different die clearance, clearance is too small easy to chew, too big burr.
Plank should choose different material mould, different material such as stainless steel and aluminum copper plate, special steel should be chosen.
Regularly check the punch and mold base coaxial, mould is not straight, unilateral chew mode or destroyed mould easily.
Molding blow head should be upward from the lowest line by Ken tweaks to the appropriate location, otherwise, cause easily once break the mold.
When the blade wear found lower die of R0.
25 mm round 0.
013 mm, grinding amount will cause the mould surface overheating, equivalent to annealing treatment, mould become soft, reduce the life span of the mould, sharpening must increase enough coolant.
After the grinding, edge sharpening stone processing, remove overly sharp line in the school, and demagnetization and oiling.
When into the mould depth is not enough, will blow head height is adjusted for required size.
Mold grinding quantity is certain, if to the values, the punch will be scrapped.
If continue to use, easy to mold and machine damage do more harm than good.
Replacing die and blade die, should pay attention to safety, before and after the boot device in case the equipment, mould, personal damage.
Easy my company main products are CNC punch press, CNC punch press, CNC turret punch press, is the most professional manufacturers of CNC punch press across the country, is the core of shandong forging machinery manufacturing enterprises, is one of the member of China machine tool corporation.
Standardization, quality control of the whole optimization, to ensure that the product performance, laid the foundation of the company's development.
Integration, terminal after-sales service, remove the trouble back at home of users
Custom message
Related Products