The operation of the polishing machine

Cast polishing machine operation is the key to try to get the maximum polishing rate, in order to remove polishing when the damage layer as soon as possible. At the same time also want to make polishing damaged layer does not affect the final observation to the organization, namely not cause false organization. The former requires the use of relatively coarse grinding, polishing rate to the larger in order to make sure there are damage layer to remove the grinding, polishing damaged layer is deeper; The latter requires the use of the finest materials, polishing damaged layer is shallow, but the polishing rate is low. The best way to solve this contradiction is the polishing is divided into two stages. Coarse behind the purpose is to remove the grinding damage layer, this phase should have maximum rate of polishing, the surface layer of rough cast formation damage is a secondary consideration, but also should be as small as possible; The second is the essence behind ( Or eventually throw) , its purpose is to remove the coarse surface damage, make the polishing damage to a minimum. Automatic polishing machine operation is simple, the operator need to polishing objects placed on the corresponding jig in advance. Fix the fixture on automatic polishing machine worktable. Start the automatic polishing machine, automatic polishing machine polishing work done in the set time, automatic stop, from the workstation to unload objects. Automatic polishing machine polishing, need to adjust the polishing head and the distance of workbench face. In order to achieve the best effect, throw the best effect. Can use manual waxing polishing process, in order to reduce machine production costs.