Products

The structure of broadband sander sand frame

by：Gewinn 2020-06-22

Broadband sander painted sand frame structure form of the broadband sander abrasive belt width greater than the width of the workpiece, abrasive belt width is generally 630 ~ 2250 mm, the company to do the minimum is 280 mm to the small handicraft plate processing needs. So to board the plane of the sanding, feed movement can only artifacts, and allows a higher feed rate, so the productivity is high. End of the abrasive belt of broadband sander than roller sanding machine abrasive belt is much longer, and so the abrasive belt is easy to cooling, and the space between the sand belt grinding grain is not easy to wear debris jam, with belt sanding machine grinding dosage than roller sanding machine. Taken the roller grinding plate sanding machine, in general, every time one of the biggest in grinding dosage is 0. 5 mm, and broadband sander maximum grinding can reach 1 at a time. 27mm. U roller sanding machine feed rate generally is 6 ~ 30 m/min, and broadband sander is 18 ~ 60 m/min. Taken the broadband sander abrasive belt's service life is long, abrasive belt replacement is more convenient, save time. Due to these advantages, in plane grinding, broadband sander almost replaced the other structural type of sanding machine, in the modern wood industry and furniture production, is used to plate a large-format grinding processing, especially the furniture industry to particle board, medium density fiberboard (MDF) substrate surface grinding

Custom message