Indonesia
Deutsch
boring machinery breaks the bottleneck.
Production backups caused by boring operations have led the carpenters to start looking for machinery manufacturers to help speed up production.
Products
The use of woodworking machinery of ordinary sand machine matters needing attention
by：Gewinn
2020-09-28
Ordinary sand machine is one of common woodworking machinery, using ordinary sand machine should pay attention to what issues?
a, sand machine installation:
to pull handle security, abrasive belt is installed on the front and back, and then put the handle back to its original position. Note: when installing abrasive belt, shall confirm the direction of the arrow on the belt on the back and tools.
, adjust the trajectory of abrasive belt: open the tools power switch; Operate the abrasive belt with handles to make sand belt track to align the center. If you don't make the processing, will lead to edge of abrasive belt chafes.
3, installation of dust bag:
put wire part of the dust bag dust bag installed parts.
4, switch operation:
sand machine start, as long as the trigger. A relaxation of the trigger, the sand machine stop running. To make a continuous rotation, under pressure after a trigger lock button. To trigger, then relax, can eliminate the continuous rotation.
note: want to plug in the past, must first check tools switch operation is smooth, the trigger to relax, can trigger switch back in situ, Closed) 。 Five, operation:
keep abrasive belt and polished surface parallel, making tools before and after. Clenched hand wheel and in front of the handle.
dongguan second-hand woodworking machinery factory warm prompt: do not forcibly pressure sand machine. Sand machine weight will be appropriate pressure. Pressure will cause the motor to stall, overheating and burning workpiece and rebound.
a, sand machine installation:
to pull handle security, abrasive belt is installed on the front and back, and then put the handle back to its original position.
note: when installing sand belt, sand should be confirmed with the direction arrow on the back and tools.
2,, adjust the trajectory of abrasive belt
open tool power switch; Operate the abrasive belt with handles to make sand belt track to align the center. If you don't make the processing, will lead to edge of abrasive belt chafes.
3, installation of dust bag:
put wire part of the dust bag dust bag installed parts.
4, switch operation:
sand machine start, as long as the trigger. A relaxation of the trigger, the sand machine stop running. To make a continuous rotation, under pressure after a trigger lock button. To trigger, then relax, can eliminate the continuous rotation.
note: want to plug in the past, must first check tools switch operation is smooth, the trigger to relax, can trigger switch back in situ, Closed) 。
5, operating:
keep abrasive belt and polished surface parallel, making tools before and after. Clenched hand wheel and in front of the handle.
dongguan second-hand machinery factory warm prompt: do not forcibly pressure sand machine. Sand machine weight will be appropriate pressure. Pressure will cause the motor to stall, overheating and burning workpiece and rebound.
a, sand machine installation:
to pull handle security, abrasive belt is installed on the front and back, and then put the handle back to its original position. Note: when installing abrasive belt, shall confirm the direction of the arrow on the belt on the back and tools.
, adjust the trajectory of abrasive belt: open the tools power switch; Operate the abrasive belt with handles to make sand belt track to align the center. If you don't make the processing, will lead to edge of abrasive belt chafes.
3, installation of dust bag:
put wire part of the dust bag dust bag installed parts.
4, switch operation:
sand machine start, as long as the trigger. A relaxation of the trigger, the sand machine stop running. To make a continuous rotation, under pressure after a trigger lock button. To trigger, then relax, can eliminate the continuous rotation.
note: want to plug in the past, must first check tools switch operation is smooth, the trigger to relax, can trigger switch back in situ, Closed) 。 Five, operation:
keep abrasive belt and polished surface parallel, making tools before and after. Clenched hand wheel and in front of the handle.
dongguan second-hand woodworking machinery factory warm prompt: do not forcibly pressure sand machine. Sand machine weight will be appropriate pressure. Pressure will cause the motor to stall, overheating and burning workpiece and rebound.
a, sand machine installation:
to pull handle security, abrasive belt is installed on the front and back, and then put the handle back to its original position.
note: when installing sand belt, sand should be confirmed with the direction arrow on the back and tools.
2,, adjust the trajectory of abrasive belt
open tool power switch; Operate the abrasive belt with handles to make sand belt track to align the center. If you don't make the processing, will lead to edge of abrasive belt chafes.
3, installation of dust bag:
put wire part of the dust bag dust bag installed parts.
4, switch operation:
sand machine start, as long as the trigger. A relaxation of the trigger, the sand machine stop running. To make a continuous rotation, under pressure after a trigger lock button. To trigger, then relax, can eliminate the continuous rotation.
note: want to plug in the past, must first check tools switch operation is smooth, the trigger to relax, can trigger switch back in situ, Closed) 。
5, operating:
keep abrasive belt and polished surface parallel, making tools before and after. Clenched hand wheel and in front of the handle.
dongguan second-hand machinery factory warm prompt: do not forcibly pressure sand machine. Sand machine weight will be appropriate pressure. Pressure will cause the motor to stall, overheating and burning workpiece and rebound.
Custom message
Related Products
